The iHomeware Smart Intruder Alarm System (IAS) is designed to detect intrusion and provide instant notification to your mobile devices. Simply follow the installation procedure and download the"iHomeware" APP. The standard IAS package includes two Beacons for a two-person home. The system relies on detecting the Beacon in order to automatically arm and disarm the alarm when it is in "auto" mode. Please provide a Beacon for every family member in the house, and attach it to their key chain, wallet, phone or anything that they always carry around. DIY Installation 1) Connect the Gateway to your home WiFi router via an Ethernet cable, 2) Remove the battery isolation tape on the Door/Window sensor, 3) Press "connect" button in the middle on the Gateway, 4) Attach the Door/Window sensor to your door or window, When your door and window are closed, the gap between the large and small part should be as small as possible and must never exceed 3cm. Otherwise the sensor may not reliably detect whether the door or window is open or closed. After installation, we recommend that you test it to ensure proper operation. 5) Download the APP. Android users can search for the keyword "iHomeware" in the Google Play Store. iOS users can search for "iHomeware" in the Apple App Store. Package: 1.Zigbee Smart Gateway*1 2.Wireless Door/Window Sensor*6 3.Smart Beacon*6 4.Power Cord *1 5.Ethernet cable*1 Important note! All our smart devices only work with Pilot Labs Gateway. Compatibility with other Zigbee products not guaranteed.