Steel machining in plastic mold components|Plastic mold components products

Steel machining in plastic mold components|Plastic mold components products

Shared by: Rufus Childe from ALIEXPRESS
Share
  • Reference Price:
    US $5.00 / piece
  • Brand Name:
    Yize
  • Package Size:
    8cm x 9cm x 10cm (3.15in x 3.54in x 3.94in)
  • Model Number:
    plastic mold components
  • Product material:
    Metal
  • Package weight:
    0.600kg (1.32lb.)
  • Unit Type:
    piece
  • Product:
    Vehicle Mould
  • is_customized:
    Yes
  • Shaping Mode:
    Plastic Injection Mould
Over 719 suppliers can give you a quotation.
Get Quotations Now
You should get the quotation(s) in 4 hours .
Description

Steel machining in plastic mold components|Plastic mold components products

The heat treatment characteristics of plastic mold components heat treatment characteristics of carburized steel plastic mold 1 for high hardness and high wear resistance and high toughness requirements of plastic mold components selection of carburizing steel and the carburizing quenching and low temperature tempering as the final heat treatment. plastic mold components of the carburized layer generally the thickness of carburized layer of 0.8-1.5mm when pressed with hard packing plastic mold components carburizing layer thickness of 1.3-1.5mm pressing soft plastic carburizing layer thickness of 0.8-1.2mm. Carburized layer for the carbon content of 0.7%-1.0% is preferred. If the carbonitriding wear resistance corrosion resistance anti-oxidation anti adhesive is better. 3 the carburization temperature generally in 900-920 small die of complex cavity desirable nitrocarburizing temperature 840-860 in carbon and nitrogen. Holding time carburizing is 5-10h concrete shall be selected according to the layer thickness requirements. The carburizing process by grading the carburizing process is appropriate namely high temperature (900-920 ) by rapid will be the main carbon into the parts surface; temperature (820-840 ) stage to increase the depth of carburized layer thus established in the carburized layer in the distribution of carbon concentration gradient is uniform and reasonable easy to direct quenching. Quenching process after Carburizing plastic mold components according to different carburizing were used: re hardening; direct quenching after carburizing classification (such as alloy carburizing steel); direct quenching temperature carbonitrided (such as small precision mold industrial pure iron and low carbon steel cold extrusion forming); air cooling after carburizing quenching (such as high alloy on the surface of large and medium-sized mold steel manufacturing). yizehanghang01 recommend you plastic mold components

Notice:The articles, pictures, news, opinions, videos, or information posted on this webpage (excluding all intellectual properties owned by Alibaba Group in this webpage) are uploaded by registered members of Alibaba. If you are suspect of any unauthorized use of your intellectual property rights on this webpage, please report it to us at the following:ali-guide@service.alibaba.com.

aisn-detail010185225180