Imperial Doorbells are mechanically operated, requiring no batteries, wiring or electricity. The doorbell simply fits onto the inside of your front door and gives maintenance free, reliable service. The doorbell uses a clockwork action, and needs only an occasional winding of the dome. They are made in England. They give a loud ring, using the door itself as a sounding board, and will continue to ring as long as the bell push button is pressed. Visitors can clearly hear that your doorbell is in working order. They offer an alternative to wireless doorbells where UPVC door frames (with metal backing for strength and security) can cause problems with wireless signal strength. The clockwork mechanism is released by a thin rod that passes through the door to a bell push button on the outside. This rod is adjustable for different door thicknesses, but where doors are particularly thick, we can supply longer rods. The bell units measure 78mm, (3") in diameter. When fully wound, the bell will ring for approximately 75 seconds, and since a typical visitor will press the bell push for between 2 and 3 seconds, the mechanism will support up to 30 rings.
Notice:The articles, pictures, news, opinions, videos, or information posted on this webpage (excluding all intellectual properties owned by Alibaba Group in this webpage) are uploaded by registered members of Alibaba. If you are suspect of any unauthorized use of your intellectual property rights on this webpage, please report it to us at the following:email@example.com.