400W 48V Brushless Spindle Motor Bracket Speed Driver Controller Power Supply

400W 48V Brushless Spindle Motor Bracket Speed Driver Controller Power Supply

Shared by: Opal Carville from ALIEXPRESS
Share
  • Reference Price:
    US $288.99 / piece
  • Unit Type:
    piece
  • Certification:
    ISO
  • Package Size:
    15cm x 12cm x 10cm (5.91in x 4.72in x 3.94in)
  • Package weight:
    0.600kg (1.32lb.)
  • is_customized:
    Yes
  • Brand Name:
    CHATPARTS
Over 1030 suppliers can give you a quotation.
Get Quotations Now
You should get the quotation(s) in 4 hours .
Description

Spindle motor features:

Spindle motor: New Brushless DC motor Power: 400W Operating voltage :48VDC Maximum working current: 10A Maximum Power: 0.4KW Rotation Speed :12000r / min. Torque: 0.5294 N.m Insulation resistance:> 2 megohm Dielectric strength: 400V Diameter: 52mm Motor Overall length: 175mm (includes gripping parts and motor) Axis collet Length: 43mm Diameter of ER11 clamping holder:16mm The spindle runout: about 0.01-0.03. Weight: 1.2kg Can be used for engraving metal or nonmetal materials.

Mount Bracket:

Diameter:55mm Suit for :400W Brushless High-speed Air-cooled PCB Spindle Motor Weight : 410g

Speed Driver Controller Features:

Working voltage: DC12-52V Drive current: Rated current 10A Peak current 15A. the drive power: 500w (up to working voltage) Speed/Current alike close loop technology smooth rotation Pure hardware design high-speed high noise immunity Speed regulation: external potentiometer adjust 0-5V analog voltage PWM speed control (MACH3 control) F/R(forward / reverse control) Rotation soft shift function Over current short circuit protection (red LED indicator) EN( enable control) function Name Intruction DC + DC- DC voltage input DC12-52V U V W motor phase HALL + Hall positive power supply HALL- Hall negative power HA HB HC Hall signal line +5 V +5 V power supply control signal VR speed control signal input terminal GND common control signal power ground F / R forward / reverse control signal terminal PWM PWM frequency (MACH3) EN Enable control input

Speed Driver Controller Installation diagram

Power Supply :

Input voltage: AC110/220V 50/60HZ Output voltage: DC48V Output power: 400W Power Weight: 0.9KG Size:215x115x50mm

Note :We will ship it by EXPRESS .

Package:

1 x 400W Brushless High-speed Air-cooled PCB Spindle Motor 1 x Brushless DC Speed Driver Controller 1x Mounting Support 6x Screws 1X Power Supply

Notice:The articles, pictures, news, opinions, videos, or information posted on this webpage (excluding all intellectual properties owned by Alibaba Group in this webpage) are uploaded by registered members of Alibaba. If you are suspect of any unauthorized use of your intellectual property rights on this webpage, please report it to us at the following:ali-guide@service.alibaba.com.

aisn-detail011139195121