IDC-26 DIN Rail Mounted Interface Module. IDC pin pitch 2.54mm/0.1" male header connector. Pitch 3.81mm/0.15" screw terminal block. Din rail mountable - for width 35 / 32 / 15mm rails. Din mount case can be taken apart for panel mount use. High quality PCB housing/carrier. FR-4 fiber glass PCB, dual copper layers. External dimensions: 87 x 80 x 54mm(W x L x H). PCB dimensions: 72 x 77.35mm(W x L). 100% new, never used. Rated voltage: 60V. Rated current: 1A / per pin. Operating Temperature: -20ºC to 50ºC Terminal block specifications: Wire range - 26-16AWG. Strip length - 5mm. Screws - M2,steel,Cr3+ Zn plated. Torque - 0.2Nm (1.7Lb-In.). Pin header and Cage - Brass. ã
Notice:The articles, pictures, news, opinions, videos, or information posted on this webpage (excluding all intellectual properties owned by Alibaba Group in this webpage) are uploaded by registered members of Alibaba. If you are suspect of any unauthorized use of your intellectual property rights on this webpage, please report it to us at the following:email@example.com.