• Sourcing Solutions
  • Services & Membership
  • Help & Community
HDD PCB for Seagate Logic Board/ 100535597 RevD ,100535597 RevB,100535597 RevA/100535602/100536284/100537087/ST9250315AS/ST9250410AS/ST9250411AS

HDD PCB for Seagate Logic Board/ 100535597 RevD ,100535597 RevB,100535597 RevA/100535602/100536284/100537087/ST9250315AS/ST9250410AS/ST9250411AS

Shared by: Vivian Hart from amazon
Share
  • Reference Price:
    null
Over 10 suppliers can give you a quotation.
Get Quotations Now
You should get the quotation(s) in 6 hours .
Description
Seagate HDD PCB/Logic Board.Board Number: 100535597 , The Hard Disk Drive is not include. Please Note: 1.These boards are used, the circuit board components not falling, the interface did not break. 2. All PCB have been tested before shipping. If the PCB is faulty during shipping, please inform us immediately after your received it. 3. If you are not sure the PCB is compatible with your HDD or not. Please contact us Replacement the PCB only can solve the problem that is caused by the PCB faulty and HDD failures are not always caused by the PCB faulty. This PCB is not guaranteed to fix your HDD. Main Controller IC: B5503A (Both IC is compatible with each other) HDD Motor Combo IC: 494009 (Both IC is compatible with each other) Board Number: 100535597 (Please make sure your original PCB board number is same as our PCB) Remarks: If your HDD firmware, date code and site code is different. You can swap the BIOS chip from original PCB to the replacement PCB, to make the replacement PCB compatible with your HDD. If you need our help to swap the BIOS chip on the PCB, please contact us. Thank you. Attention: Replacement the PCB only can solve the problem that is caused by the PCB faulty. If your HDD having the following problem. Symptoms of failure: The drive will power up normally (no ticking noises, errors etc) but will not be recognized by the computer The drive will power up normally and be recognized correctly but will report a size of 0 bytes The drive will power up but report SMART errors on boot Replacement the PCB may not solve the above problem. These problem is caused by the HDD firmware corrupted.

Notice:The articles, pictures, news, opinions, videos, or information posted on this webpage (excluding all intellectual properties owned by Alibaba Group in this webpage) are uploaded by registered members of Alibaba. If you are suspect of any unauthorized use of your intellectual property rights on this webpage, please report it to us at the following:ali-guide@service.alibaba.com.

ensearchweb011171168240