non penetrating foof mount satellite mount This is the Non-Penetrating Roof Mount 2" for the Slimline Dish 2" Mast Diameter Minor adjustment of mast pitch from 2 degrees positive to 10 degrees negative Black powder coated steel construction 1.50" angle steel frame Holds Eight concrete blocks for ballast No roof drilling or roof penetration required * K.D. assembly allows easier portability to the roof. This mount provides a 2.0" mast, the installer selects the diameter when assembling the frame. If the flat roof has a sleight pitch the mast can be adjusted from 2° outward from the frame to a little over 10° inward toward the block area. No holes need to be drilled in the roof surface, this avoids reluctance by building owners and reduces the possibly of roof leaks. The total weight of the assembly can be varied by the use of either "light" concrete blocks or standard weight blocks. Of course, this and ALL roof mounted antenna assemblies should be tethered to the building with a flexible steel cable for maximum security.
Notice:The articles, pictures, news, opinions, videos, or information posted on this webpage (excluding all intellectual properties owned by Alibaba Group in this webpage) are uploaded by registered members of Alibaba. If you are suspect of any unauthorized use of your intellectual property rights on this webpage, please report it to us at the following:firstname.lastname@example.org.