• Sourcing Solutions
  • Services & Membership
  • Help & Community
Pliers sealing machine + clamp type sealing machine + hand holder sealing machine+portable sealing machine

Pliers sealing machine + clamp type sealing machine + hand holder sealing machine+portable sealing machine

Shared by: Randy Champin from ALIEXPRESS
Share
  • Reference Price:
    US $135.00 / Set
  • The sealing width:
    10mm
  • Power:
    300W
  • Heat sealing temperature:
    0-150°C
  • Package weight:
    2.000kg (4.41lb.)
  • Device Name:
    hand type sealing machine
  • Packaging Type:
    Cartons
  • The biggest sealing length:
    200mm
  • Driven Type:
    Electric
  • Condition:
    New
  • Application:
    Beverage
  • Device model:
    YS-E-7
  • Package Size:
    30cm x 30cm x 10cm (11.81in x 11.81in x 3.94in)
  • Automatic Grade:
    Semi-Automatic
  • The power supply:
    220V/60Hz
  • The weight:
    1.3kg
  • Type:
    Sealing Machine
  • Model Number:
    YS-E-7
  • Brand Name:
    YASON
  • The electric power:
    300W
  • Packaging Material:
    Paper
  • Unit Type:
    set
View full details
Over 1814 suppliers can give you a quotation.
Get Quotations Now
You should get the quotation(s) in 5 hours .
Description

Pliers sealing machine + clamp type sealing machine + hand holder sealing machine+portable sealing machine

Technical parameters

Device name hand type sealing machine Device model YS-E-7 (maximum sealing length 200 mm) The powersupply: 220V/60Hz The electric power 300W The sealing width 10mm The biggest sealing length 200mm Heat sealing temperature 0-150C The weight 1.3kg

Equipment Introduction This series pliers type sealing machine mainly is suitable for the large packaging or not easy to move the weight of outer packing plastic bags sealing. The machine design and lightweight easy operation good sealing effect. Widely used in aluminum foil film composite film sealing etc.

Operating items 1.According to the POWER supply the POWER indicator

2.Adjust temperature according to the thickness of the material material spinning temperature OFF direction is reduced ON direction to increase.

3.Preheating HEATING HEATING the light the temperature is reached when the lights went out.

4.Put plastic bags sealing surface press the handle keep 1-5 seconds loosen the handle is sealed.

Matters needing attention 1.If pincer-like device damaged may be the heating time is too long reduce the heating time or preheat temperature.

2.If the seal is not firm may be the heating time is too short the material thermal bonding is not sufficient or ascending temperature should increase the sealing time.

Product pidture

Notice:The articles, pictures, news, opinions, videos, or information posted on this webpage (excluding all intellectual properties owned by Alibaba Group in this webpage) are uploaded by registered members of Alibaba. If you are suspect of any unauthorized use of your intellectual property rights on this webpage, please report it to us at the following:ali-guide@service.alibaba.com.

ensearchweb010185195244