Power Substation - 15 KVA - Converts 480V to 120VAC and 240V Outlets with GFCI - Trailer Tires(-Three Phase). Made in the USA The Larson Electronics MGS-15KVA-120-240-30AFT-60A-TW heavy duty power transformer substation converts 480 VAC single phase or three phase electrical current to single phase 120V AC and 240V AC. This unit provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power. Includes ADR6034 60 amp receptacle and ACP6034BC 60 amp plug for 60 amp feed through. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* The MGS-15KVA-120-240-30AFT-60A-TW power transformer substation provides a safe and effective way for operators in industrial settings to tap into and utilize power sources independently of the work area. This unit provides an effective power source for operators performing plant turnarounds, maintenance and cleaning in hazardous areas, equipment installations and repairs, and any activities requiring an alternative to native power sources. This unit is designed to operate with 480 VAC which it then steps down to 120 and 240 VAC. This portable transformer makes 120VAC available via 10 GFCI protected receptacles and 240VAC available via two L6-30R 240VAC outlets. Also Included with this transformer is an ADR6034 60 amp receptacle and ACP6034BC 60 amp plug for 60 amp feed through capability. The MGS-15KVA-120-240-30AFT-60A-TW converts 480 VAC single phase to single phase 120V AC and 240V AC via a 15 KVA transformer. Protection is provided through the use of 10 GFCI protected outlets and integral breaker boxes on both input and line outs. 20 Feet of Line Power Type-W cable connects to a fused ON/OFF disconnect switch which controls power to the 15 KVA, 480 Volt Transformer.