TIH 030M/110VC Small Induction Heater The SKF small induction heater TIH 030M/110VC combines high heating capacity with portability. The compact lightweight design makes the TIH 030M/110VC portable. Placing the induction coil outside the heater's housing allows the heating of bearings weighing up to 40 kg (88 lbs). The induction heater is equipped with thermal overheating protection to reduce the risk of damage to the induction coil and the electronics. In addition to temperature mode, the TIH 030M/110VC is equipped with a time mode for heating components other than bearings. The induction heating system is supplied standard with three yokes and is available the executions: 100-110V/50-60Hz. SKF induction heater range The comprehensive range of SKF induction heaters is suitable for most bearing heating applications. The chart gives general information on choosing an induction heater for bearing heating applications.³) The SKF m20 concept represents the weight 28 kg (61.7 lbs) of the heaviest SKF spherical roller bearing of TIH 030M/110VC which can be heated from 20 to 110 °C (68 to 230 °F) in 20 minutes. This defines the heater’s power output instead of its power consumption. Unlike other bearing heaters, there is a clear indication of how long it takes to heat a bearing, rather than just the maximum bearing weight possible. SKF induction heater range × 3) For heating components other than bearings, SKF recommends consideration of a TIH 030M/110VC heater. Contact SKF to help you select a suitable induction heater for your application.