Clutch puller tool

Types of Clutch Puller Tools

A clutch puller tool is a tool used to remove the clutch from the crankshaft of an engine. Different types of clutch puller tools are used to make this process easier.

• Two or three-legged puller

  The two or three-legged puller has two or three legs that are used to grip onto the surface that needs to be pulled. This clutch puller tool is very useful for getting into small spaces and pulling out objects without damaging the surrounding surfaces. It is often used in automotive and mechanical applications, such as removing gears, bearings, and seals.

• Bearing puller

  The bearing puller is specifically designed to remove bearings from shafts or housings. It comes in different sizes, including small, medium, and large, which are used to remove different sizes of bearings. This puller is commonly used in mechanical equipment maintenance and assembly. The bearing puller has arms that grip the inner or outer race of the bearing and a central screw that applies force to pull the bearing out.

• Gear puller

  The gear puller is a tool that is used to remove gears that are stuck or inaccessible. It has claws that can grip onto the gear teeth without causing damage to the gear or the surrounding components. The gear puller is useful in situations where gears need to be replaced or when disassembling equipment for maintenance.

• Slide hammer

  The slide hammer is a versatile tool that is used in various applications, including automotive, metalworking, and general mechanics. It consists of a long rod with a sliding weight and a pulling attachment at the end. The pulling attachment can vary, but it is typically a hook, a threaded stud, or a chisel point. The slide hammer is used to remove components that are stuck, such as seals, bearings, and bushings.

Specification and Maintenance of Clutch Puller Tool

There are lots of clutch puller tool specifications to choose from, depending on the needs and requirements. Some of them are as follows:

• Material

  The clutch puller tool is made of high-grade steel and carbon steel. On some occasions, it can also be made of chrome vanadium steel. These materials are strong and durable, so they can work well for a long time.

• Surface Treatment

  The surface of the clutch puller tool is treated with polishing, chrome plating, and anti-rust coating. This treatment can improve its corrosion resistance, rust resistance, and wear resistance.

• Size

  The size of the clutch puller tool varies according to the model. But generally, the maximum diameter of the puller is 60 mm, and the minimum diameter is 30 mm. The length of the puller arm is 100 mm, and the thread pitch is 1.5 mm.

• Application

  The clutch puller tool is usually used in motorcycle engines, automotive engines, and other small engines for disassembling and assembling tasks. It can help pull clutches, flywheels, bearings, and other components.

Here is some advice on how to maintain clutch puller tools.

• 1. Keep It Clean: After use, the clutch puller tool should be cleaned and free of dust, dirt, and debris. This can be accomplished using a clean cloth or brush. Also, the tool should not be clogged with dirt, which affects its performance and accuracy.
• 2. Lubrication: The puller tool should be lubricated regularly to keep it smooth and reduce friction. This can be accomplished using a suitable lubricant or oil. Pay attention to the moving parts of the tool and add a proper amount of lubricant or oil.
• 3. Store It Properly: The clutch puller tool should be stored properly in a dry and clean place away from children and moisture. It is also important to keep the tool away from corrosive materials and chemicals to extend its service life.
• 4. Regular Inspection: The clutch puller tool should be inspected regularly to see if there is any damage, wear, or rust. If any problems are found, take corresponding measures in time, such as repair or replacement.

How to Choose Clutch Puller Tool

There are several factors to consider when choosing clutch puller tools, such as:

• Type of Clutch Puller

  There are different types of clutch pullers, each suitable for specific purposes. Choose the one that meets the needs of the intended audience. For example, a 3-way puller is ideal for most manual and motorcycle flywheels. At the same time, a 2-jaw clutch puller is suitable for small applications, such as removing bearings.

• Size

  The size of the clutch puller is an important consideration when choosing a clutch puller tool. It is necessary to choose a tool that is neither too large nor too small for the intended application. For example, using an oversized puller could end up damaging the flywheel or the surrounding areas. On the other hand, a small puller tool will be ineffective in removing the clutches.

• Material

  The material of the clutch puller tool affects its durability and strength. It is advisable to choose tools made from high-strength steel or carbon steel. Such tools have a higher tensile strength, which reduces the risk of breaking or bending when removing tight or rusted clutches.

• Quality

  Consider the quality of the clutch puller tool before making the order. Tools from reputable manufacturers might be pricier but are a worthwhile investment. This is because they are long-lasting and offer value for money. Additionally, the quality of the tool affects the performance. Choose a clutch puller with superior quality to ensure the audience is satisfied.

• Handle

  Consider the type of handle the clutch puller tool comes with. Opt for tools with comfortable and non-slip handles. Such puller tools allow for prolonged use without fatigue. Additionally, the risk of slipping and causing damage when using the tool is minimized.

• Visibility and Storage

  Choose a clutch puller tool that is easy to see in low-light conditions. Additionally, opt for tools that come with a carrying case. This makes it easy to transport the tool and also ensure it is stored safely when not in use.

How to DIY and Replace Clutch Puller Tool

Replacing a clutch puller tool is a straightforward process. To replace it:

• Read the user guide to know how to use the tool properly.
• Ensure that the tool is not damaged. Check every part of the tool to see if it is in good condition.
• Check the clutch puller tool to see if there are any signs of wear.
• If they are worn out, replace them.

It is important to note that clutch puller tools should be replaced after extended use. Always take good care of the tool so that it can serve for a longer period.

Below are steps on how to replace a clutch puller tool.

• 1. Remove the old clutch puller tool from the engine.
• 2. Clean the area where the old tool was removed.
• 3. Take the new clutch puller tool and inspect it to see if it is in good condition.
• 4. Follow the instructions in the manual guide to install it.
• 5. Ensure that it is properly fitted and working well.

Q&A

Q1: What is a clutch puller tool?

A1: A clutch puller is a hand tool used to remove the clutch from a shaft. It is typically used when disassembling the engine or when the clutch is being replaced.

Q2: How do people use clutch puller tools?

A2: To use a clutch puller, first, the puller is placed behind the clutch. After that, the screws are tightened up to the clutch plate. Finally, the center bolt is tightened until the clutch is released.

Q3: Where is the clutch puller tool located?

A3: The clutch puller is located on the outside of the clutch, where it is visible. The clutch puller tool is easy to find and accessible.