(870 products available)
An IR jack is a device that allows communication with an infrared (IR) capable device. These include remote controls, IR receivers, and transmitters. The iR jack supports various protocols, including NEC, RC5, and Sony SIRC, making it compatible with many IR remote control systems.
Generally, IR jacks come in different types:
IR receiver jack
An IR receiver jack receives infrared signals from remote controls. It decodes the received signals into electrical signals that a device can understand. Different protocols are used to communicate these signals, including NEC, RC5, and Kaseikyo. IR receiver jacks are commonly used in consumer electronic devices like TVs, audio systems, and set-top boxes. They enable users to control devices remotely from a distance.
IR transmitter jack
On the other hand, an IR transmitter jack sends out infrared signals that are coded to represent specific commands. These commands are often related to the operation of a particular device. For instance, pressing the 'Volume Up' button on a remote control may send a coded signal through the IR transmitter jack, instructing the device to increase the volume. Commonly used protocols by IR transmitter jacks include NEC, RC6, and Philips Discreet. They are often found in devices like remote controls, allowing for wireless communication and control over various devices.
IR controller jack
An IR controller jack enables communication between a controller and managed devices. It allows users to send commands to control functions like power, volume, and channel. IR controller jacks are used in universal remote controls, programmable remote controls, and learning remote controls. They enhance remote control functionality by allowing communication with various devices and enabling customized control settings.
Serial IR jacks
Serial IR jacks use serial communication protocols to send and receive data between devices. This allows for more advanced control and communication capabilities. Applications of serial IR jacks include remote controls for advanced features, such as macros and programmable functions, as well as communication between devices in home automation systems. They enable more complex control and interaction between devices, enhancing functionality and convenience.
IR data jack
An IR data jack is a specialized component used in some devices to handle data transmission over infrared (IR) signals. These jacks enable communication between devices using infrared technology, which allows for wireless data transfer. For example, IR data jacks can be used for remote controls, allowing users to control devices such as TVs, audio systems, and other electronics from a distance without needing a physical connection.
IR jacks have different specifications depending on the type and model. Here are some common specifications:
IR Transmission Range
This specification refers to the distance that IR jacks can transmit signals. It is between 30 to 100 feet.
Operating Frequency
IR jacks operate with different frequencies. The frequency is mostly between 30 to 100 kHz.
Power Supply
IR jacks have different power supply specifications depending on the type. The common power supply requirement is 5V to 12V DC.
Data Transmission Speed
Some IR jacks have a data transmission speed of up to 1 Mbps. The transmission speed affects how fast data is sent through the IR jack.
Operating Temperature
IR jacks are designed to operate under specific temperatures. The normal temperature is between 0 to 70 degrees Celsius.
Signal Range
The IR jacks have a strong signal that can cover a distance of 30 to 100 feet. Users may need to adjust the settings to get a strong signal within the specified range.
IR Frequency
The IR frequency is 38 kHz, which is a common frequency used for remote control signals. This frequency ensures that the IR jack receives and transmits signals accurately.
Voltage
The IR jacks operate with a voltage of 3.3V to 5V. This voltage is suitable for low-power applications, such as controlling devices and sending signals over short distances.
Current
IR jacks have a current specification of 10mA to 50mA. The current is used to power the signal transmission. Higher currents can increase the transmission range and improve signal strength.
Maintaining IR jacks is important for reliable performance and longevity. Below are some general maintenance tips:
Cleaning
Regularly clean the IR jacks to remove dust, dirt, and debris that may interfere with the signal transmission. Use a soft, dry cloth or cotton swab to clean the surface of the IR jack and the surrounding area. Avoid using harsh chemicals or abrasive materials that can damage the IR jack.
Avoid Moisture
IR jacks are sensitive to moisture and humidity. Keep them away from liquids and damp environments. Exposure to moisture can cause corrosion and affect the functionality of the IR jack.
Proper Handling
IR jacks are small and fragile components. Handle them carefully to avoid physical damage or breakage. Avoid applying excessive force when plugging or unplugging cables.
Check Connections
Periodically check all connections related to the IR jack, such as power and signal cables, to ensure they are secure and not loose. Loose connections can disrupt data transmission and lead to intermittent or no response.
Firmware Updates
If the IR jack is part of a larger device with firmware, check the manufacturer's website for available updates. Firmware updates may include performance improvements and bug fixes related to IR communication.
Replace When Necessary
IR jacks have a limited lifespan. If users notice a significant decrease in performance or failure to transmit/receive signals, consider replacing the IR jack with a new one.
Choosing an I R jack requires careful consideration of several factors that cater to the target market's needs. Here are some of them:
Weight Capacity
When choosing an IR hydraulic jack, consider the weight capacity. The jack should be able to handle the weight of the vehicles in the target market. For example, if the target market consists of heavy trucks, a jack with a higher weight capacity is needed.
Lift Height
The lift height is also an important factor to consider. The IR jack should have a longer lift height if the target market uses larger vehicles. A jack with a shorter lift height is sufficient if the target market consists of smaller vehicles.
Construction Material
Consider the construction material when choosing an IR jack. A jack made with steel is durable and can withstand the heavy lifting of large vehicles. However, a steel jack is heavy, which may be a drawback. An aluminum IR jack is lightweight and portable, but it may not be durable.
Safety Features
Choose an IR jack with safety features. The hydraulic jack should have safety features like overload protection, a safety valve, and a locking mechanism to ensure the safety of the users and the vehicle being lifted.
Portability
Consider the jack's portability. A lightweight and compact jack is easy to carry and transport. This is especially useful for road assistance services, where the jack needs to be transported in a vehicle.
Ease of Use
Choose an easy-to-use IR jack. The hydraulic jack should be easy to set up and operate. Consider features like a quick lift mechanism and an adjustable saddle height.
Warranty
Consider the warranty when choosing an IR jack. A longer warranty period shows that the manufacturer is confident in the jack's durability. The warranty also provides protection against defects in material and workmanship.
Replacing an IR jack can be a simple process for those who have basic soldering skills and are comfortable working with electronic components. Here's a step-by-step guide on how to DIY and replace an IR jack:
Gather the necessary tools and materials:
Take the device apart:
Using a small screwdriver, remove the screws holding the device's casing together. Gently pry open the casing and take note of how it was assembled to reassemble it later.
Locate the IR jack:
Find the IR jack's position on the circuit board. It will be a small component with several pins connected to the circuit board.
Test the new IR jack:
Before soldering the new IR jack, use a multimeter to test it and ensure it is functioning correctly (optional).
Desolder the old IR jack:
Use a soldering iron to heat the solder joints holding the IR jack in place, and use a desoldering pump or solder wick to remove the molten solder. Be careful not to damage the circuit board while desoldering.
Cut the old IR jack off:
Once the solder joints are removed, cut the old IR jack off using wire cutters.
Solder the new IR jack:
Carefully position the new IR jack on the circuit board, aligning its pins with the corresponding pads. Use a soldering iron to melt solder and fill the gaps between the pins and the pads, ensuring a secure connection.
Reassemble the device:
Once the new IR jack is installed, carefully close the device's casing and reinsert the screws to hold it together.
Test the device:
Plug the device into the power source and test the new IR jack to ensure it works correctly. If it does not, double-check the soldering connections and the IR jack's orientation.
Q1: Can a 2-ton jack lift any vehicle?
A1: No, a 2-ton jack cannot lift any vehicle. A 2-ton capacity jack can lift vehicles that have a lifting weight of up to 400,012 kg. Any vehicle above that cannot be lifted using a 2-ton jack.
Q2: Can an ir jack lift a heavy truck?
A2: No, an ir jack cannot lift a heavy truck. Most trucks are heavy and designed with high-clearance frames, which makes it difficult to lift them using jacks. Jacks cannot be used on trucks because they are unsafe and ineffective.
Q3: How long does it take to lift a vehicle with an ir jack?
A3: The time taken to lift a vehicle using an ir jack will depend on various factors such as the type of jack, the model of the vehicle, and the experience of the user. Generally, it takes a few minutes to lift a vehicle under normal circumstances.
浙公网安备 33010002000092号
浙B2-20120091-4